• pH & Alkalinity Reducer 6 x 1kg

pH & Alkalinity Reducer 6 x 1kg, SCT10015484

Instructions

1. Use a good quality test kit to determine the pH and/or the Total Alkalinity reading.
2. To reduce pH readings add 10g per 1000lts of Spa and Hot Tub water sprinkling product directly to the water with circulation on. This application will lower the pH by approximately 0.2
3. Only make one addition of pH and Alkalinity Reducer at a time and always re-test the water, should a further addition be required please follow step 1 again.
4. To reduce
 
Total Alkalinity add 15g per 1000lts of Spa and Hot Tub water with circulation on. Add product to the deepest point of the Spa / Hot Tub in one application. This application will lower the Total Alkalinity by approximately 10 – 20 ppm (mg/l)
5. Always re-test the water after each application.

PRECAUTIONS
• Always ensure bathers are out of the water when adding chemicals.
• Never mix with any other chemicals including cleaning products, weed killers, and chlorine products, as a dangerous reaction may occur.
• Always handle products in a well-ventilated area.
• Always wash hands thoroughly after handling chemicals.
• Store in a cool, dry, well ventilated, secure place. Ensure chemicals do not become damp in storage.
• Instructions and dosages given are a guide to the most effective use.

WARNING
• This container must not be used or contaminated with any other materials.

Write a review

Please login or register to review

pH & Alkalinity Reducer 6 x 1kg


Tags: SpaChem Trade pH Alkalinity Reducer

If our trade pack sizes are on the slightly larger side than what you needed
simply head over to our retail site by clicking the relevant section links below.

Blue box with Hot Tub Image for retail Spa Chemicals  Pink box with Pool Icon for Pool Chemicals  Light Green Box with Spa Filter Icon  Yellow box with parts & accessories icon  Lime green box with servicing icon  Light blue box with training icon